Full product range & more information:
www.lumenalights.com
Decimina
–
12v Plug & Play
All variations
INSTRUCTIONS
WARNINGS
PLEASE READ THESE INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION / MAINTENANCE
•
If a fitting is found to be damaged, cease use immediately.
•
This is a Class 3 product (Low Voltage)
–
no earth required.
•
12V TRANSFORMER REQUIRED
–
sold separately
•
This unit must be fitted by a competent person
–
if in doubt consult a qualified electrician.
•
Install in accordance with IEE wiring regulations and current Building Regulations.
•
To prevent electrocution, switch off mains supply before installing or maintaining this fitting. Ensure other persons cannot restore
the electrical supply without your knowledge.
•
This light fitting should be connected to a circuit with a 30Ma RCD fitted.
•
If replacing an existing fitting, make a careful note of the connections.
•
When changing the bulb(s), always switch off at the mains & allow the bulb to cool before handling
–
LAMP WILL GET HOT
WHEN IN USE
.
•
All connections should be made as watertight as possible to avoid electrical shortage.
•
Always use the correct type & wattage of bulb. Never exceed the wattage stated.
•
The unit may get warm whilst on for a period of time.
•
12v Lighting must be wired in parallel, not series, and cable lengths kept to a minimum.
CLEANING:
Occasional cleaning and care is recommended for this product. Please refer to our website for the best way to clean different
materials.
RETURNS:
If purchased from a 3
rd
party, please contact your supplier. If purchased direct, contact us by phone or email:
Lumena Lights Ltd, Centre 33 Long March, Daventry, Northants, NN11 4NR
Tel: +44 1327 871161 Fax: 0800 066 4410 Email:
Producer Registration Number: WEE/KC3440XY
Voltage:
12v Low Voltage
Max. Wattage:
35w
Bulb Holder:
MR11 (lamp sold separately
–
LED recommended)
IP Rating:
IP67
Cable:
2 Core H05RN-F Versa Plug & Play (Length may vary)
Plug:
2 Pin (male) Versa Plug & Play
Installation Hole Size:
60mm
✔✔
2 YEAR
GUARANTEE
see website for
more details