background image

INSTALLATION:

 

 

 

 

Approx. 3m length of 240v 3 core rubber cable is supplied with a 3 pin UK mains 
plug fitted (H05RN-F 

 may vary).  

 

Simply plug the Rock Light into the outdoor waterproof mains socket. 

 

Install Bulb as per below. 

 

Mount the Rock Light in desired location with ground spike provided (see overleaf). 

 

NOTES:

  

 

Ensure all cabling is positioned carefully around the edges of the garden and clearly 
visible, to avoid damage after installation. Do not bury the cable supplied with this 
fitting. 
 

 

 
BULB INSTALLATION:

 

 

 

 

Turn off the power supply. 

 

Remove the base by unscrewing the 4 x screws. 

 

Screw the E27 / ES bulb into the bulb holder 

 DO NOT exceed maximum wattage 

or overtighten. 

 

Ensure the cables have not become loose when removing the base. 

 

Replace the base and secure with the 4 x screws. Do not overtighten or this could 
damage the outer shell. If there is damage around the predrilled holes, simply drill 
new holes in a slightly different location to ensure the base is fitted securely.

 

 

 

 

 

Full LUXROX Range & More Information:

 

TIP: 

As the LUXROX uses a standard E27 
bulb, this enables more choice when it 
comes to selecting the preferred type of 
LED bulb; colour and brightness. 

Содержание LUXROX 1

Страница 1: ...mains allow the bulb to cool before handling LAMP WILL GET HOT WHEN IN USE All connections should be made as watertight as possible to avoid electrical shortage Always use the correct type wattage of bulb Never exceed the wattage stated The unit may get warm whilst on for a period of time Cable must NOT be buried locate on the surface or hook up on fence The plug supplied is not waterproof Connect...

Страница 2: ...itting BULB INSTALLATION Turn off the power supply Remove the base by unscrewing the 4 x screws Screw the E27 ES bulb into the bulb holder DO NOT exceed maximum wattage or overtighten Ensure the cables have not become loose when removing the base Replace the base and secure with the 4 x screws Do not overtighten or this could damage the outer shell If there is damage around the predrilled holes si...

Страница 3: ...e dry the ground spike will be secure Mounting into Grass Remove a small area of turf Follow the Mounting into Earth instructions above Mounting into Gravel or Stones Dig a hole 100mm in diameter and 170mm deep Fill with wet sand Attach the spike to the threaded socket provided on the LUXROX base and gently push into the wet sand Push down on the top layer of sand to ensure it is tightly surroundi...

Страница 4: ... be issued Please contact us prior to returning goods and include the relevant documents Please see our website for more information RETURNS Lumena Lights Ltd Centre 33 Long March Daventry Northants NN11 4NR Tel 44 1327 871161 Fax 0800 066 4410 Email sales lumenalights com Producer Registration Number WEE KC3440XY www lumenalights com ...

Отзывы: