Lumel RE15, Руководство пользователя, Страница: 18 / 28

18
4013 R,W Ouc 0...3 Range of the continuous output no I: 0-0-20 mA for
current outputs; 1-4-20 mA ; 2-0-10 V ; 3-0-5 V
4014 R,W Ouc 0...3 Range of the continuous output no II: as above
4015 R,W Out 0...18 Output function no 1: 0-no used, 1- Y1 , 2- Y2-c , 3- Y2-S ,
4- ahi , 5-alo , 6- dbhi , 7- dblo , 8- dbhl , 9- dbin ,
10- Ahi2 , 11- Alo2 , 12- Eout , 13- EoP , 14- Err1 ,
15- Err2 , 16- tri1 , 17- tri2 , 18- trsp
4016 R,W Out 0...18 Output function no 2: as above
4017 R,W Out 0...18 Output function no 3: as above
4018 R,W Out 0...18 Output function no 4: as above
4019 R,W Bar 0...4 Bargraph function no 1: 0- control signal Y1 0...100%;
1-control signal Y2 0...100%; 2-signal from the main input
spll ... splh ; 3-signal from the additional input
i2Lo ... i2Hi ; 4-set value spll ... splh
4020 R,W Bar 0...4 Bargraph function no 2: as above
4021 R,W rsp 0, 1, 2 Kind of set value, 0- constant value, 1- programmed,
2- from the additional input
4022 R,W sp Depends Set value for the constant control
1)
on the input
4023 R,W naro 0...999 Change speed of the set value during the soft-start*10
4024 R,W Nrpr 1...15 Program number executed for the programmed control
4025 W 0, 1, 2 Control of the program work:0-stop, 1-continue,
R 0, 1 2-start from the beginning
4026 R,W Pb 0...9999 Proportional band for the main line*10
4027 R,W Tj 0...3600 Integration time-constant
4028 R,W Td 0...1000 Differentiation time-constant
4029 R,W To 1...250 Cycle time
4030 R,W H 0...999 Hysteresis for on-off control
1)
4031 R,W pb-c 0...9999 Proportional band for the auxiliary line*10
4032 R,W Tj-c 0...3600 Integration time-constant for the auxiliary line
4033 R,W Td-c 0...1000 Differentiation time-constant for the auxiliary line
4034 R,W to-c 1...250 Cycle time for the auxiliary line
4035 R,W Hj-c 0...999 Hysteresis for on-off control of the auxiliary control
1)
4036 R,W Hn 0...999 Dead band for three-state control
1)
4037 R,W typr 0,1 Kind of control: 0: inverse, 1- direct
4038 R,W y-of 0...1000 Correction of the control signal *10 (for the integration
time-constant ti=0)