Lumberjack TS254SE, Оригинальное руководство пользователя

Страница: 15 / 25

TS254SE 13
Maintenance and Service
Before any work on the machine itself,
pull the mains plug.
If the machine should fail despite the care
taken in manufacturing and testing
procedures, repair should be carried out by an
approve service centre.
– Store the tool, instruction manual and
accessories in a secure place. In this way you
will always have all the information and parts
on hand.
Changing the Blade
Removing the saw blade
– Remove the saw blade protector (
6
).
– Remove the stage plate ( 26 ).
– Bring the saw blade to its highest sawing
position.
– Bring the saw blade to 45° position and lock.
A. Loosen the motor shaft (
39 ) with the
enclosed assembly wrench.
B. Loosen the clamping nut with the second
assembly wrench.
– Remove the clamping nut ( 40 ) and clamping
flange ( 41 ) with the saw blade from the motor
shaft.
Installing saw blade
– Clean all parts to be assembled before
Installation.
– Insert a new saw blade.
17
– Position the clamping flange (
42
), screw on the
nut (
41
) and tighten using the enclosed
assembly wrench.
Align the laser
The laser must align with the saw blade.
– Remove the saw blade protector.
– Bring the saw blade to its highest sawing
position.
– Bring the saw blade to 0° position and lock.
– Loosen the cross head screws (
43
).
– Align the laser ( 44 ) to the saw blade.
– Tighten the cross head screws (
43
) again.
Cleaning
– For safe and proper working, always keep the
power too land its ventilation slots clean.
– Remove dust and chips after each working
procedure by blowing out with compressed air
or with a brush.