– Screw the supporting legs (
20
) to the angled
profiles with the carriage bolts M6 × 20mm,
washers, spring washers and nuts (
21
). Make
sure that the holes (
22
) engage with one
another.
– Screw the front/rear (
22
) and side stays (
23
)
to the supporting legs with the carriage bolts
M6 × 20mm, washers, spring washers and nuts
(
24
).
– Turn the circular saw bench round with the
assistance of a second person and place it on
its supporting legs.
Attach the Splitting Wedge
– Unscrew the countersunk head screws and
remove the stage plate (
26
).
– Unscrew the hexagonal socket head screws
(
27
).
– Firmly screw down the splitting wedge (
8
) with
the hexagonal socket head screws (
27
).
Attach the Saw Blade Protector
– Position the saw blade protector (
6
) onto the
splitting wedge (
8
) as illustrated and screw
down with the carriage bolts M6 × 50mm,
washer and nut (
28
).
TS254SE 09
ASSEMBLY
Содержание TS254SE
