Lumberjack TS254PL, Оригинальное руководство пользователя

Страница: 5 / 27

TS254PL 03
GENERAL POWER TOOL SAFETY WARNINGS
c) When Battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal object
that can make a connection from one terminal
to another.
Shorting the battery terminals
together may cause burns or a fire.
D) User abusive conditions, liquid may be
ejected from the battery; Avoid contact. If
contact accidentally occurs, flush with copious
amounts of water. If liquid contacts eyes, seek
medical help immediately.
Liquid ejected from
the batter may cause irritation or burns.
7. Additional Safety and working
Instructions
7.1. Dust from materials such as lead-containing
coatings, some wood types, minerals and
metals can be harmful to one’s health and
cause allergic reactions, leading to respiratory
infections and/or cancer.
Materials containing
asbestos may only be worked by specialists.
Observe the relevant regulations in your country
for the materials to be worked.
7.2. Prevent dust accumulation at the
workplace.
Dust can easily ignite.
8. Additional Warnings for Table Saws.
8.1. Never stand on the power tool.
Serious injuries can occur when the power tool
tips over or when inadvertently coming into
contact with the saw blade.
8.2. Take care that the blade guard operates
properly and can move freely.
Always adjust the blade guard in such a
manner that the face is loosely against the
work piece when sawing.
Never clamp the
blade guard when it is open.
8.3. Never reach behind the saw blade in order
to hold the work piece, remove saw
Dust/wood chips or for any other reason.
Your hand may get caught in the rotating blade.
8.4. Guide the work piece against the saw
Blade only when the machine is switched on.
Otherwise there is a chance of kickback, when
the saw blade becomes wedged in the work
piece.
8.5. Keep handles dry, clean, and free from oil
and grease.
Greasy, oily handles are slippery causing loss of
control.
8.6. Operate the power tool only when the
work area to the work piece is clear of any
adjusting tools, wood chips, etc.
Small pieces of wood or other objects that come
in contact with the rotating saw blade can strike
the operator at high speed.
8.7. Only saw one work piece at a time.
Work
pieces placed on top or aside of each other can
cause the saw blade to jam or the work pieces to
move against each other while sawing.
8.8. Always use the parallel guide or the angle
guide.
This improves the cutting accuracy and reduces
the possibility of saw blade binding.
8.9. Use the machine for grooving or rebating
only with an appropriately suitable protective
device (e. g. a tunnel blade guard).
8.10. Do not use the machine for cutting slots
(Stopped grooves).
8.11 Use the machine only for cutting the
materials listed under Intended Use.
Otherwise, the machine can be subject to
overload.