Lumberjack SCMS254SB, Инструкция по безопасности и эксплуатации

Страница: 6 / 24

SCMS254SB 04
GENERAL POWER TOOL SAFETY WARNINGS
l) Always use saw blades with correct size and
shape (diamond versus round) of bore. Saw
blades that do not match the mounting
hardware of the saw will run eccentrically,
causing loss of control.
m) Do not use high speed steel (HSS) saw
blades. Such saw blades can easily break.
n) Do not touch the saw blade after working
before it has cooled. The saw blade becomes
very hot while working.
o) Never operate the machine without the
insert plate. Replace a defective insert plate.
Without flawless insert plates, injuries are
possible from the saw blade.
p) Check the cable regularly and have a
damaged cable repaired only through an
authorised customer service agent. Replace
damaged extension cables. This will ensure that
the safety of the power tool is maintained.
q) Store the machine in a safe manner when
not being used. The storage location must be
dry and lockable. This prevents the machine
from storage damage, and from being operated
by untrained persons.
r) Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held more
secure than by hand.
r) Never leave the machine before it has come
to a complete stop. Cutting tools that are still
running can cause injuries.
s) Never use the machine with a damaged
cable. Do not touch the damaged cable and pull
the mains plug when the cable is damaged
while working. Damaged cables increase the risk
of an electric shock. 9. Safety Warnings for Lasers
The mitre saw has a built-in laser light. The laser is
CLASS IIIa. These lasers do not normally present an
optical hazard. However, DO NOT stare at the
beam, as this can cause flash blindness.
a) Do not remove or deface any product labels.
Removing product labels increases the risk of
exposure to laser radiation.
b) The laser beam can be harmful to the eyes.
Always avoid direct eye exposure. Do not project
the laser beam directly into the eyes of others or
at any object other than the workpiece.
c) Do not look directly into the laser-beam-
output aperture during operation.
d) Turn the laser on only when making cuts. The
laser on the mitre saw is not a toy. Always keep it
out of the reach of children. The laser light
emitted from this device should never be directed
toward any person for any reason.
e) Always turn the laser beam off when it is not
in use. Leaving the tool on increases the risk of
someone inadvertently staring into the laser’s
beam.
f) Be sure that the laser beam is aimed at a
workpiece (such as wood or a rough-coated
surface) that does not have a reflective surface.
g) Do not use on materials that have shiny,
reflective surfaces, such as sheet metal. The
reflective surface could reflect the beam back at
the operator. Be aware that laser light reflected
off of a mirror or any other reflective surfaces can
also be dangerous.
h) Always wear laser-protective eyewear when
working on or near reflective surfaces.
9.8 Do not attempt to activate the laser when the
tool housing is removed.
i) The laser is activated by means of a button
switch that is independent of the main switch for
the saw.