Lumberjack RT1500, Оригинальное руководство пользователя

Страница: 12 / 25

RT1500 10
ASSEMBLY & OPERATION
Mounting to a Working Surface
– Fasten the power tool with suitable screw
fasteners to the working surface. The
mounting holes serve for this purpose.
– Clamp the power tool with commercially
available screw clamps by the feet to the
working surface
Dust/Chip Extraction
Dusts from materials such as lead‐containing
coatings, some wood types, minerals and
metal can be harmful to one’s health.
Touching or breathing‐in the dusts can cause
allergic reactions and/or lead to respiratory
infections of the user or bystanders.
Certain dusts, such as oak or beech dust, are
considered as carcinogenic, especially in
connection with wood‐treatment additives
(chromate, wood preservative). Materials
containing asbestos may only be worked on by
specialists.
– Always use dust extraction
– Provide for good ventilation of the working
place.
– It is recommended to wear a P2 filter‐class
respirator.
Observe the relevant regulations in your
country for the materials to be worked.
The dust/chip extraction can be blocked by
dust, chips or work piece fragments.
– Switch the machine off and pull the mains
plug from the socket outlet.
– Wait until the router bit has come to a
complete stop.
– Determine the cause of the blockage and
correct it.
External Dust Extraction
Connect a suitable extractor to the extractor
hood (
1
). Internal diameter 70mm.
The dust extractor must be suitable for the
material being worked. When vacuuming dry
dust that is especially detrimental to health or
carcinogenic, use a special dust extractor.
Operation
Be aware you should always make sure that
On/off switch (
5
) is set to the off position and
that the tool is not plugged in to any outlet
before making any adjustments to the router
table.
Installing and Removing the Collet
(7).
– Turn the router rise and fall handle (
6
) so that
the collet is set to it maximum height.
– Pull spindle lock (
21
) to engage the
mechanism, and using tool wrench (
22
)
untighten the collect (
7
) in an anti‐clockwise
direction.
Be aware
you will need both hands to achieve
this, one hand engaging the spindle lock (
21
),
and one to untighten the collet (
7
).