Lumberjack RSS150, Руководство пользователя

Страница: 13 / 20

reciprocating saw.
11
Maintenance and Service
Before any work on the machine itself, pull
the mains plug.
If the machine should fail despite the care
taken in manufacturing and testing
procedures, repair should be carried out by
an approve service centre.
‐ Regularly check to see if any dust or foreign
matter has entered the grills near the motor
and around the trigger switch. Use a soft
brush to remove any accumulated dust.
Wear safety glasses to protect your eyes
whilst cleaning.
‐ Re ‐ lubricate all moving parts at regular
intervals.
‐ If the body of the sander needs cleaning,
wipe it with a soft damp cloth. A mild
detergent can be used but nothing like
alcohol, petrol or other abrasive cleaning
agents. Never use caustic agents to clean
plastic parts.
CAUTION! Water must never come in to
contact with the
Materials You Can Cut
The reciprocating saw is a versatile tool that
allows you to cut many different types of
material, some of which are
‐ Wood products, like lumber, hardwodds,
plywoods, and composite boards.
‐ Drywall
‐ Fibre boards and plastics
‐ Metals, like pipes, steel rods, sheet steel,
aluminium, brass and copper.
Please note these require different blades for
each operation.