MAINTENANCE, SERVICE & LUMBERJACK GUARANTEE
1.
Guarantee
1.1
Lumberjack guarantees that for a period of 12
months from the date of purchase the
components of qualifying products (see clauses
1.2.1
to 1.2.8) will be free from defects caused by
faulty construction or manufacture.
1.2.
During this period Lumberjack, will repair or
replace free of charge any parts which are proved
to be faulty in accordance with paragraph 1.1
providing that:
1.2.1
You follow the claims procedure set out in
clause 2
1.2.2
Lumberjack and its authorised dealers are
given reasonable opportunity after receiving
notice of the claim to examine the product
1.2.3
If asked to do so by Lumberjack or its
Authorised dealer, you return the product at your
own cost to Lumberjack’s or supplying Authorised
Dealer’s premises, for the examination to take
place clearly stating the Returns Material
Authorisation number given by Lumberjack or an
Authorised Dealer.
1.2.4
The fault in question is not caused by
industrial use, accidental damage, fair wear and
tear, wilful damage, neglect, incorrect electrical
connection, misuse, or alteration or repair of the
product without approval.
1.2.5
The product has been used in a domestic
environment only.
1.2.6
The fault does not relate to consumable
items such as blades, bearings, drive belts, or
other wearing parts which can reasonably be
expected to wear at different rates depending on
usage.
DTJ300-600
07
Maintenance and Service
–
Before each use
inspect the general condition
of the machine. Check for loose screws,
misalignment or binding of moving parts,
cracked or broken parts, and any other condition
that may affect its safe operation.
–
Each day
remove all sawdust and debris from
the jig with a soft brush, cloth or vacuum. Do
not use solvents or caustic agents to clean the
jig.
