Lumatek 1000W, Инструкция по эксплуатации, Страница: 7 / 56

Ensure the driver is secured and flip the fixture over
so the driver is now underneath. Insert the end
of the light bar with the hook into the square
hole in Frame A
Then insert the other end; align the round hole
on Frame B with the light bar’s magnetic end
and insert male pin into female socket.
Ensure magnetic connection is secure.
6.2 Connect the LED light bars
Assemble the rest of the light bars into the fixture frame as shown in the figure above.
6.1.1 Assemble the frame
Note the direction when installing; the LED driver mounting bracket is on top when
the fixture is hung.
6.1 Fixture assembly & installation
Please take care when assembling fixture and ensure all connections are true and secure
Connect Frame A and B to the
support frame by pressing button on
frame connector and inserting into
support frame socket and lock.
Ensure button clicks into hole socket
to lock.
Connect Frame B to support frame
end near LED driver power output &
dimming female connectors.