manualshive.com logo in svg

Lumascape ZDClink Luxor SATlink, Руководство пользователя

Поделиться
Скачать
Lumascape ZDClink Luxor SATlink Скачать руководство пользователя страница 20

20

Operating the Controller

•  Select the 

Test Theme

 checkbox to temporarily turn on all 

groups that have been set in a theme. While this function 
is active, a user can make adjustments to the theme and 
see the changes in real time. This function will end when a 
key has not been pressed for five minutes, the home key is 
pressed, or another theme is selected.

•  To completely clear the theme, select the 

Erase

 button. This 

function not only clears all fields in the theme, but it also 
removes the erased theme from any existing programs.

3.  Set the duration or the amount of time that the group  

will run.

4.  Navigate to and select the 

Start

 button with the  

scroll wheel.

5.  To stop the countdown, activate the 

Stop

 button. This will 

only pause to allow for adjustments and should not delete 
any settings above.

If the group is currently running within a program, the manual 
setting will take precedence. 

When the manual settings are finished, the regularly scheduled 
program will immediately continue its operation at the next 
event time, even if it was interrupted.

After manual settings have been started, the intensity and time 
can be adjusted while it is still running.

Figure 17: Themes screenshot

Manual Mode 

The manual mode is used to turn on and adjust lights outside of 
the set programs. Manual settings will always take precedence 
over any currently running programs.

1.  From the 

Home

 screen, navigate to the 

Manual

 screen using 

the scroll wheel.

2.  Designate a group number and choose the desired intensity.

Figure 18: Manual screenshot

Содержание ZDClink Luxor SATlink









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды