3
LumaPro Operating Instructions
39UU86, 39UU89, 39UU96, 39UU97
LED Bullet
Floods
Wiring Diagram
Installation Instructions
1.)
Inspect components to ensure that male and
female port threads and sealing surfaces are free
of burs, nicks and scratches or any foreign
material.
2.)
Thread fixture into cover plate (not included)
or ground stake (not included) as shown.
3.)
Using two wrenches, hold fitting at desired aiming
angle and tighten locknut without exceeding the
rated torque value of 350 in. lbs.
4.)
Inspect to ensure that the washer is seated flat
on the mounting surface.
5.)
Connect power to fixture, referencing wiring
diagram. Make sure the power supply is
disconnected before installing.
6.)
Supply power to the fixture and enjoy your new LED Bullet Flood.
Warranty
LIMITED FIVE-YEAR WARRANTY
Should this product fail to perform satisfactorily due to a defect or poor workmanship within
FIVE YEAR from the date of purchase, return it to the place of purchase and it will be
replaced, and free of charge. Incidental or consequential damages are excluded from this
warranty.
Manufactured for Grainger International, Inc.
100 Grainger Pkwy., Lake Forest IL 60045 U.S.A.
