58
VENTUS 2.0 Manual / Updated 2013/2/15
/ Operational Manual
VENTUS 2.0
It tells about the list of the number of time slot. However, as it says, the value can not be the same as always.
When selecting 6 from the list, out rate has been higher than Source rate, the setting is not properly operate.
Interleaver
Interleaving is a data mixing process. The buffer change depending on the size of mode. It’s just because Interleaving
mixing data does not affect the bit rate.
Scramble
Scramble is the process to random the data. It generates a random number of random columns, and the original data
is added to the process. A random group of the number has column eight.
Selecting this group called the scrambling mode . Some do not care if you select a value, the scramble mode to be 0
CLCH that are set forth in the standard.
Now, the group is ready.
Output from the menu to test the transmission frequencies will be set up after the RF.
-> If you are using AMP & Attenuator Amplitude button, you can adjust the power level.
AMP & Attenuator AMPLITUDE ON, this must be used, must make sure that you are after.
P ower level control to be controlled, +7 dBm(+3dbm over frequency of 1GHz) ~-110dBm, and minor changes in
the shuttle and a 0.5dB If you enter a number directly Adjustable unit is 0.1 dB.
One Multi-channel from channel to channel stream files, if you need to add a T-PUMP Multiplexer in the middle of
the menu when you click the right mouse button to add or delete channels are available.
