Radio Frequency Interference Statement
NOTE:
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which cause the user will be required to correct the interference at his
own expense.
This digital apparatus does not exceed the Class A limits for radio noise emissions
from digital apparatus set out in the Radio Interference Regulations of the Canadian
Department of Communications
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les
limites applicables aux appareils numériques de classe A prèscrite dans le
Règlement sur le brouillage radioélectrique édict par le Ministère des
Communications du Canada.
Warning
: Only devices certified to comply with the Class A limits pursuant to
Subpart A of the FCC Rules may be attached to this equipment. Operation with non-
certified devices is likely to result in interference to radio and TV reception. Changes
or modifications made to this equipment, not expressly approved by the FCC could
void the user's authority to operate the equipment.
To maintain compliance with FCC radio frequency emission limits, shielded cables
are required to connect equipment to other Class A certified devices and the use of
quadshield, RG-6/U type CATV cable is required for connection to the CATV system.
Any changes or modifications may void the user's authority to operate this equipment.
