Lumantek ez-MD+, Руководство по эксплуатации

Страница: 9 / 16

VIDEO IN : Video input selection (Position 6)
- SDI input mode (DIP SW : 1)
- HDMI input mode (DIP SW : 0)
AUDIO IN : Audio input selection (Position 7)
- Internal audio input mode (DIP SW : 1)
- External audio input mode (DIP SW : 0)
RATIO : Video output screen ratio(Position 5)
- FULL 16:9 (DIP SW : 1)
- Latter 4:3 or Pillar Box (DIP SW : 0)
AUDIO GAIN : External input audio GAIN setting (Position 10)
- External input audio GAIN 0dB (DIP SW : 1)
- External input audio GAIN -10dB (DIP SW : 0)
If external input audio signal level is normal use default : -10dB
GAIN settings only works when input audio is set to external.
SYNC MODE : Synchronizing mode selection (Position 8,9)
- Genlock mode B,B or Tri-Level(DIP SW : 10 or 11)
(Only supported when REF IN resolution and
output resolution are same)
- Input Lock mode (DIP SW : 01)
(Only supported when input and
output resolutions are same)
- Free Running mode (DIP SW : 00)
02. Interface
b. MODE Settings
9
AUDIO GAIN
10
0dB
-10dB