Lumantek ez-MD+, Руководство по эксплуатации

Страница: 5 / 16

Features
①
Inputs & outputs
Input : 1 x SD/HD/3G-SDI (BNC 75
Ω
)
1 x SD/HD/3G HDMI (Type A)
1 x Ref. In / Genlock B/B or TRI-Level (BNC 75
Ω
)
Output : 1 x SD/HD/3G-SDI (BNC 75
Ω
)
1 x SD/HD/3G HDMI (Type A)
Audio in & out : 1 x D-SUB 9pin (female)
②
Supports SD/HD/3G
③
DIP Switch for settings changes
Video output resolution and ratio, video format input (SDI or HDMI)
Audio (internal or external), sync mode (free running, input lock, Genlock (B.B or TRI-Level)
Audio Gain(0 or -10dB)
④
ROTARY Switch : Audio Delay Control (10 Step) x1
⑤
LED Display : Link (GREEN x1), Ref (GREEN x1), Audio Level Meter Left (GREEN x1, RED x1),
Audio Level Meter Right (GREEN x1, RED x1)
Diagram
Lumantek’s ez-MD+ is a cross-converter supporting both SDI and HDMI as inputs and
outputs. It has many functionalities other than converting like audio mux and demux
through XLR, reference in (genlock), scaler, and audio delay control.
01. Introduction
AUDIO IN
REF
HDMI IN
REF IN
INT.
SYNC
SDI IN
AUDIO OUT
SDI OUT
HDMI OUT
RX Block Scaler
PLL
TX Block
5