Lumag RP1400 PRO, Руководство оператора

Страница: 18 / 24

- 12 -
Keep the air cleaner element clean.
URETHANE FOAM ELEMENT
Remove the element and wash it in
kerosene or diesel fuel. Then saturate it in a
mixture of 3 parts kerosene or diesel fuel and 1
part engine oil. Squeeze the element to remove
the mixture and install it in the air cleaner.
URETHANE FOAM DUAL STRUCTURE
1. Clean the urethane foam in the same way as
described above.
2. Wash the element in kerosene or diesel fuel.
Saturate it in a mixture of 3 parts kerosene or
diesel fuel and 1 part engine oil. Shake off
excessive oil.
B. Remove spark plug, clean and adjust the
spark plug gap to 0.6-0.7mm(0.02-0.03 in.).
(Fig-15)
C. Drain the motor oil of the engine and replace
with new specified oil. (Fig-16)
NOTE: When the engine is new, the
first oil change must be made after 20 hours of
operation and replenish the oil tank before
operating.
7-3. Monthly Service
Change the oil in the vibrator assembly.
7-4. Storage
When storing the compactor for long periods
after operation.
A. Thoroughly drain the fuel from the fuel tank
fuel pipe and carburetor.
B. Pour a few drops of motor oil into the
cylinder by removing the spark plug. Rotate the
engine several times by hand so that the
cylinder interior is covered with oil.
C. Clean the outer surface of the machine with
an oil moistened cloth. Cover the unit and store
in a humidity-free area.