9
501 Series NVR Quick Start Guide
Check the Cameras
After log-in, your screen shows the live page, which
should look similar to the illustration at right.
If a camera is out, check its connection to your
NVR, and ensure that it is powered up.
Edit Camera Settings (Optional)
To adjust camera settings, click on the settings icon
(
). In the configuration screen, click on
Camera
Management
(at the very bottom of the left column).
This displays a table of all IP cameras configured for
the NVR. In the rightmost column is a link to each
such IP camera. This link opens a new tab in your
browser for your camera’s local interface menu (see
your camera manual for details). It can only be used
from within the network.
Reinstalling Network Cameras
If you are taking cameras that were previously attached to a
network and plugging them directly into your NVR, you must
do a hardware reset on the cameras. See your camera’s manual
or the technical reference manual for details.
