10
501 Series NVR Quick Start Guide
Set Up Dynamic DNS
This allows you to connect to your surveillance system from anywhere, via the Internet,
using a web address that’s easy to remember.
Click on
Configure this Recorder
>
Network Settings
>
DDNS
.
Click the box labeled
Enable DDNS
, then choose a type from the
DDNS Type
menu. Next,
choose a server address.
We recommend WirepathDDNS.
Enter your desired domain in the
Domain
box. This creates a personalized server address,
which is shown under
Device URL
.
If someone has already registered your desired domain, the system adds a unique ID
(typically two to four digits) to your domain. If you do not like these digits, try another
domain or server address.
Example: If you choose the domain
myhome
(as shown), your system’s URL would be
myhome.WirepathDDNS.com. If someone
already had claimed the myhome URL, then
your system’s URL would be something like
myhome13.WirepathDDNS.com.
Click
Save
to finalize the settings here.