8
www.LumaComfort.com
S
ET
U
P AND
O
PERATION
Carefully remove all packaging materials and retain for future storage/use.
Make sure there is no residual foam left in any of the components. No tools will
be required to assemble this evaporative cooler.
1.
Choose a suitable location for your evaporative cooler. This product works
best in areas with a fresh air supply.
2.
Fill the water tank with clean water through the water inlet. Ice cubes may
also be used for added cooling.
3.
Connect the unit to a power supply and turn the SPEED dial. The fan will
start.
4.
To begin cooling, turn the COOLER dial to the ON position. To experience
the full cooling effect, wait a few minutes for the cooling pads to become
fully saturated with water.
5.
Periodically check the water level on the water level indicator. If the water
tank is running low on water, turn the COOLER dial to the OFF position
and add more water/ice.
6.
To turn the unit off, turn the COOLER dial to the OFF position and the
SPEED dial to the OFF position. If the unit will not be used for an extended
period of time, empty the water tank by unplugging the drain plug located
on the back of the evaporative cooler.
R
EFILLING THE
W
ATER
T
ANK
The water tank can be refilled by using one of
these methods:
Manual
: Fill the water tank by pouring water
into the tank from the back of the cooler
through the water inlet.
Continuous
: The tank can be filled
continuously by connecting a garden hose to
the continuous water supply inlet/hose
connector.
