10
Luma 510/710 Series Bullet Camera
Physical Installation
1. Drill pilot holes for your screws in the mounting surface, using the supplied template.
2. Attach the base plate and run the
cables through it.
3. Thread the cables through the
waterproof housing as shown here.
Place your terminated category
cable into the plastic needle and
push the needle through one of the
rubber nipples in the waterproof
housing. Repeat for 12V power
and/or audio wires as needed.
4. Clip the waterproof housing to the
mounting plate. Ensure all clips are
fully engaged. Secure the housing
with the supplied screws.
