Lufft 8910.U050, Руководство пользователя

Страница: 30 / 63

IRS31Pro-UMB Operating Manual V10 / 01.2020
G. Lufft Mess- und Regeltechnik GmbH 30
Figure 17: Operating instructions UMB-Config-Tool
10.3 Function Test with the UMB Config Tool
The function of the sensor can be tested with the UMB Config Tool by polling various channels.
Note: All other devices which are used in the polling process, e.g. modems, LCOM etc., must be
disconnected from the UMB network during the function test.
10.3.1 Channels for Measurement Polling
You can select the channel for measurement polling by the UMB Config Tool by clicking on the respective
channel.
Figure 18: Channel Selection in the UMB Config Tool
Note: Channel selection relates to measurement polling for the UMB Config Tool only. In general, all
channels are always available for polling and do not need to be enabled in the sensor.
10.3.2 Example of Measurement Polling
Figure 19: Measurement Polling with the UMB Config Tool