background image

 

 

 

 

 

STATEMENT OF WARRANTY 

 
Ludlum Measurements, Inc. warrants the products covered in this manual to be free of 
defects due to workmanship, material, and design for a period of twelve months from the 
date of delivery. The calibration of a product is warranted to be within its specified 
accuracy limits at the time of shipment. In the event of instrument failure, notify Ludlum 
Measurements to determine if repair, recalibration, or replacement is required. 
 
This warranty excludes the replacement of photomultiplier tubes, G-M and proportional 
tubes, and scintillation crystals which are broken due to excessive physical abuse or used 
for purposes other than intended. 
 
There are no warranties, express or implied, including without limitation any implied 
warranty of merchantability or fitness, which extend beyond the description of the face 
there of.  If the product does not perform as warranted herein, purchaser’s sole remedy 
shall be repair or replacement, at the option of Ludlum Measurements.  In no event will 
Ludlum Measurements be liable for damages, lost revenue, lost wages, or any other 
incidental or consequential damages, arising from the purchase, use, or inability to

 

use 

product

 

 
 

 

RETURN OF GOODS TO MANUFACTURER 

 

If equipment needs to be returned to Ludlum Measurements, Inc. for repair or calibration, please send to 
the address below.  All shipments should include documentation containing return shipping address, 
customer name, telephone number, description of service requested, and all other necessary information. 
 Your cooperation will expedite the return of your equipment. 
 
 
 

 

LUDLUM MEASUREMENTS, INC. 

 

ATTN: REPAIR DEPARTMENT 

 501 

OAK 

STREET 

 

SWEETWATER, TX 79556 

 

 

800-622-0828   325-235-5494 

FAX 325-235-4672

 

Содержание 44-7












Отзывы: