Models 375-31H Area Monitor with Neutron Detector
Section 6
Ludlum Measurements, Inc.
Page 6-3
January 2021
Warning!
The operator is strongly cautioned to take the following
precautions to avoid contact with internal hazardous live parts
that are accessible using a tool:
1. Turn the instrument power
OFF
and disconnect the power
cord.
2. Allow the instrument to sit for one minute before accessing
internal components.
The “
crossed-out wheelie bin
” symbol notifies the consumer that the
product is not to be mixed with unsorted municipal waste when discarding;
each material must be separated. See section 8, “Recycling” for further
information. Also displayed on the side panel.
The “CE” mark is used to identify this instrument as being acceptable for
use within the European Union.
Electrical Safety Precautions
Warning!
Observe the following instructions to avoid a potentially
hazardous situation which, if mishandled, could result in
death or serious personal injury, as well as property damage.
Do not expose the unit to rain or an environment where it may be
splashed by water or other liquids, as doing so may result in fire or
electric shock.
Use the unit only with the voltage specified on the unit. Using a
voltage higher than that which is specified may result in fire or
electric shock.
Do not cut, kink, or otherwise damage nor modify the power supply
cord. IN addition, avoid using the power cord in close proximity to
heaters, and never place heavy objects – including the unit itself –
on the power cord, as doing so may result in fire or electric shock.
Avoid installing or mounting the unit or its power supply in unstable
conditions, such as a rickety table or a slanted surface. Doing so may
