Model 15
Technical Manual
Section 2
Ludlum Measurements, Inc.
Page 2-1
June 2020
Getting Started
Unpacking and Repacking
Remove the calibration certificate and place it in a secure location. Remove
the instrument and accessories (batteries, cable, detectors, etc.) and ensure
that all of the items listed on the packing list are in the carton. Check
individual item serial numbers and ensure calibration certificates match. The
Model 15 serial number is located on the front panel below the battery
compartment. Most Ludlum Measurements detectors have a label on the
base or body of the detector for model and serial number identification.
Important!
If multiple shipments are received, ensure that the detectors
and instruments are not interchanged. Each instrument is
calibrated to specific detectors, and therefore not
interchangeable.
To return an instrument for repair or calibration, provide sufficient packing
material to prevent damage during shipment.
Every returned instrument must be accompanied by an
Instrument Return
Form
, which can be downloaded from the Ludlum website at
. Find the form by clicking the “Support” tab and
selecting “Repair and Calibration” from the drop-down menu. Then choose
the appropriate Repair and Calibration division where you will find a link to
the form.
Model 44-7
When shipping a Model 44-7 by air, it is necessary to ship the
tube in a sealed container to avoid sudden atmospheric
changes, which could rupture the tube.
Section
2
