Luda tractorCam S, Руководство пользователя

Страница: 35 / 78

35
11. Troubleshooting
The purpose of this chapter is to systematically go through errors that might have occurred during
the installation. Follow the scheme below to locate the problem in your installation. If you can’t find
a solution for your problem, please go to Chapter 15 for customer service.
The monitor is considered working if the Power LED is lit up, and the menu choices can be seen.
No picture at all (black)
Possible error
• The monitor is not switched on.
• The monitor does not have power
connected to it.
No picture (No signal)
Possible error
• No antenna on the camera/monitor.
• Incorrect channel chosen.
• The camera is supplied with power
(the power indicator is lit up) but you
still receive no signal.
• The camera is not supplied with power
(the power indicator isn’t lit up)
Action
• Turn the monitor on. Press the On/Off
(power) button.
• Start the tractor to make sure the
lighter socket is supplying power.
• Make sure the lighter socket adapter is
pushed all the way into the socket (the
red LED is lit up).
• Make sure the other end of the lighter
socket adapter is connected to the
monitor.
•
If you are using the alternative cable
connection, make sure the installation is
correct and supplying power.
Action
• Make sure the small antenna or the large
antenna with cable is mounted on
the back of the camera/monitor and that it
is tightly fastened.
• Choose the channel the camera is
transmitting on.
• Make sure that the antenna is thoroughly
attached to the back of the camera/
monitor, pair the camera and monitor.
• Start the tractor and turn on the power
to the power source.
• Make sure that the joints are carefully
put together. Further make sure that the
power cable is not broken or pinched.