![LUCTRA 9226 Скачать руководство пользователя страница 16](http://html.mh-extra.com/html/luctra/9226/9226_translation-of-the-original-instructions_1946837016.webp)
EN
LUCTRA | 13
English
Operating the VITACORE
®
Control Panel
14. On-off touch button
15. Touch buttons to adjust the light intensity
16. Boost touch button
17. Touch buttons to adjust the light colour
18. USB charging ports
– Tap the On-Off touch button to switch the light on or off.
– Tap the touch button to reduce the light intensity.
– Tap the touch button to increase the light intensity.
– Tap the touch button to make the light colour warmer (reddish).
– Tap the touch button to make the light colour colder (bluish).
– Tap the boost touch button to activate maximum light intensity of the cold white LEDs.
Note:
The boost function is terminated automatically after 30 minutes.
• The boost touch button symbol lights up when the function is activated.
– Terminate the boost function prematurely by tapping any touch button.
• If the boost function has terminated or the 30 minutes have expired, the VITACORE
®
con-
trol uses the pre-set values.
Automatic deactivation function
The lamp is turned off automatically after 4 hours in order to save electricity. It can then be
switched on again so that is can run again for a maximum of 4 hours.
You can activate or deactivate this function:
– Hold down both the boost touch button and the touch button for 5 seconds.
• The lamp flashes briefly 3 times to confirm that the automatic deactivation function has
been turned off.
• The lamp 3 times in a prolonged manner to confirm that the automatic deactivation func-
tion has been turned on.
Automatic activation function for connection to the power grid
The lamp can automatically activate itself when it has been connected to the power grid.
You can activate or deactivate this function:
– Hold down both the boost touch button and the touch button for 5 seconds.
• The lamp flashes briefly 3 times to confirm that the automatic activation function has been
turned off.
• The lamp flashes 3 times in a prolonged manner to confirm that the automatic activation
function has been turned on.
USB charging ports
Smartphones and tablet PCs can be charged via two built-in USB charging ports (18).
WARNING!
Risk of property damage!
Use only undamaged USB cables. This prevents damage to your devices and the
lamp.
Note:
The ports are only used to charge the connected devices. No data is transmitted.
Содержание 9226
