3. CONFIGURATION
If you unmark the
Enable backup routes switching
check box, the backup routes system
operates in the backward compatibility mode. The router selects the default route based on
implicit priorities of the enabled settings for each of the network interfaces, as the case may
be enabling services that set these network interfaces. The following list contains the names
of backup routes and corresponding network interfaces in order of implicit priorities:
•
Mobile WAN (pppX, usbX)
•
PPPoE (ppp0)
•
WiFi STA (wlan0)
•
Secondary LAN (eth1)
•
Primary LAN (eth0)
Example:
The router selects the
Secondary LAN
as the default route only if you unmark the
Create connection to mobile network
check box on the
Mobile WAN
page. Alternatively, if you
unmark the
Create PPPoE connection
check box on the
PPPoE
page. To select the
Primary
LAN
, delete the IP address for the
Secondary LAN
and disabled the
DHCP
Client for the
Secondary LAN
.
Item
Description
Priority
Priority for the type of connection.
Ping IP Address
Destination IP address of ping queries to check the connection.
(The address can not be specified as a domain name.)
Ping Interval
The time intervals between consecutive ping queries.
Table 30: Backup Routes
All changes in settings will be applied after pressing the
Apply
button.
45
09-05-16
LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. 09127/59 460-10 * Fax. 09127/59 460-20 * www.lucom.de
w
w
w
.luco
m.d
e
inf
o@lucom
.de
