LUCKYSMART LBT-1, Руководство по эксплуатации

Страница: 12 / 32

11
3.Install the antenna of control box
1) Find the hole reserved for installing the antenna extension cable at the stern of
the bait boat.
2) Remove the nut and washer on the antenna extension cable.
3) Pass the screw part of the antenna extension cable through the reserved hole
from the cabin.
4) Put the washer and nut on the screw respectively, and then tighten the nut with
a wrench.
5) Tighten the control box antenna on the screw (Be sure to tighten it!)
4.Connect cable
After the above components are installed, please connect each part to the control
box.
●
TRANSDUCER: Connect the probe.
●
GPS:Connect to GPS receiver.
●
POWER:Connect the power cord.
●
LINK:Shows whether the connection between the control box and the device
is normal.
Note: The LINK light is on last 3 seconds after power on and LINK light will flash
after connected with GPS correctly.
●
ANTENNA:Connect the antenna extension cable.
The bait boat part has been installed so far.
TRANSDUCER
GPS
LINK
POWER