41
Values
Meaning
Floppy
The system attempt to boot from diskette.
(first boot device default)
LS 120
The system will attempt to boot from an attached LS 120 drive.
(Third boot device default)
HDD 0
The system will attempt to boot from the first HDD.
(Second boot device default)
SCSI
The system will attempt to boot from the first device attached to
the first SCSI interface.
CD-ROM The system will attempt to boot from the first CD-ROM found.
HDD1
The system will attempt to boot from the second HDD.
HDD2
The system will attempt to boot from the third HDD.
HDD3
The system will attempt to boot from the fourth HDD.
ZIP100
The system will attempt to boot from an attached ZIP 100 drive
LAN
The system will attempt to boot over the network. You will
require a LAN card with boot BIOS for this option to function.
First ~ Third
boot device
Disabled
This disables booting from this device.
Keyboard Typematic Rate and Delay Settings
If you set the
typematic rate setting
item to disabled, the system will use the defaults of 6
and 250 for the rate and delay items. If you set it to enabled you can select the values
yourself. Refer to the table below:
Values
Meaning
Typematic
Rate
6 ~ 30
This value sets the amount of time a character is repeated per
second if it is kept down on the keyboard. Choose from the
following values: 6, 8, 10, 12, 15, 20, 24, 30.
Typematic
Delay
250 ~ 1000
This value sets the amount of time in ms before a character
starts repeating after it was pressed on the keyboard. Choose
from 250, 500, 750 and 1000 ms.
Security Option
The security option item allows you to select when the password needs to be entered. Refer
to the table below:
Values
Meaning
Setup
Password must be entered only when the user wants to enter the
BIOS setup.
Security
Option
System
The password must always be entered at boot.
