Lucky Star 6VPM1, Руководство пользователя

Страница: 13 / 71

6VPM1 Main Board 10
2-2-3 JBAT1: CMOS Status
JBAT1
is a 3-pin connector. Clear CMOS if system password is forgotten.
Below are details to show how to clear CMOS.
Procedure to clear CMOS:
Step 1: Shut down the system and disconnect the power supply from AC power.
Step 2: Pull out the power cable from ATX connector “POWER1”.
Step 3: Short the CMOS jumper by putting jumper cap on Pin 2-3 for a few seconds.
Step 4: Return to pin 1-2 for normal setup.
Step 5: Link ATX power cable to ATX connector & connect AC power to power supply.
Step 6: Turn on system power.
If you’d like to set password, press “DEL” Key during system bootup to enter
CMOS setup and establish a new password.
JBAT1: CMOS Status
1
2
3
1
2
3
Set to "1-2"---
Normal(default)
Set to "2-3"---
Clear CMOS