VIA693A System Board 49
Onboard Serial Port 1/Port 2
:3F8/IRQ4
:2F8/IRQ3
:3E8/IRQ4
:2E8/IRQ3
:Auto
(default)
:Disabled
UART 2 Mode
:Standard
(default) --- the user is not allowed to modify “IR Function Duplex,”
and “TX, RX inverting enable.”
:ASKIR
--- the user is allowed to modify “IR Function Duplex,” and “TX, RX
inverting enable.”
:HPSIR
--- the user is allowed to modify “IR Function Duplex,” and “TX, RX
inverting enable.”
ECP Mode Use DMA
Select a DMA channel for the parallel port for use during ECP mode.
:3
(default)
:1
Parallel Port EPP Type
This item allows you to determine the IR transfer mode of onboard I/O chip.
:EPP1.9
:EPP1.7
(default)
