Lucky Star 6P2LX, Руководство пользователя

Страница: 17 / 35

6P2LX
I440LX PAGE 14
QUICK POWER ON SELF TEST:
THIS CATEGORY SPEEDS UP POWER ON SELF TEST. (POST) AFTER
YOU POWER ON THE COMPUTER, IF IT IS SET TO ENABLE, BIOS WILL
SHORTEN OR SKIP SOME CHECK ITEMS DURING POST.
ENABLE : ENABLE QUICK POST
DISABLED: NORMAL POST
BOOT SEQUENCE:
"A,C,SCSI," "C,A,SCSI," "C,CDROM, A," "D,A,SCSI," "E,A,SCSI,"
"F,A, SCSI," " SCSI, A,C," "SCSI, A,C," "C ONLY," " LS/ZIP, C."
SWAP FLOPPY DRIVE:
THE SWAP FLOPPY DRIVE. DEFAULT VALUE IS DISABLED. ENABLED:
FLOPPY A&B WILL BE SWAPPED UNDER THE DOS DISABLED:
FLOPPY A&B WILL BE NOT SWAPPED.
BOOT UP FLOPPY SEEK:
DURING POST, BIOS WILL DETERMINE IF THE FLOPPY DISK DRIVE
INSTALLED IS 40 OR 80 TRACKS. 360K TYPE IS 40 TRACKS WHILE
720K, 1.2M AND 1.44M ARE ALL 80 TRACKS. THE DEFAULT VALUE IS
ENABLED.
BOOT UP NUMLOCK STATUS:
THE DEFAULT VALUE IS ON.
ON: KEYPAD IS NUMBER KEYS.
OFF: KEYPAD IS ARROW KEYS.
BOOT UP SYSTEM SPEED:
IT SELECTS THE DEFAULT SYSTEM SPEED-THE SPEED THAT THE
SYSTEM WILL RUN AT IMMEDIATELY AFTER POWER UP.
HIGH: SET THE SPEED TO HIGH.
LOW: SET THE SPEED TO LOW.
NOTE: THE BOARD DEFAULT VALUE IS LOW IN THE FIELD. BOOT
THE SYSTEM TO CONTROLLER TURBO OR DE-TURBO BY
ON-BOARD (TURBO SWITCH).