Lucky Star 6P2BX2, Руководство пользователя

Страница: 7 / 81

Page 1
Chapter 1 Introduction
1-1 The Main Board Overview
The main board is a new generation Pentium® II, III main board which integrates
the latest advances in processor, memory, I/O technologies into an ATX form
factor. The main board utilizes Intel® 82440BX/ZX AGPset designed for
Pentium II,III CPU, and supports new architects such as high-speed AGP graphic
Port, SDRAM, Ultra DMA/33, Bus master IDE and USB port. It has three Dual
In-line Memory Modules (DIMM) which can be installed with SDRAM memory .
The memory subsystem supports up to either 768MB EDO RAM or 384MB
SDRAM, using standard 168-pin DIMM sockets.
The main board, using the slot 1 socket, accepts Intel® Pentium® II,III (66/100
MHz) processors at speeds from 233 MHz to 500 MHz and is able to support
faster CPUs upgrated in the future. Built-in second level (L2) cache in CPU, there
is no cache necessary in this main board.
The main board has implemented ITE I/O Controller utilizes with fully Plug and
Play device which supports 2.88 MB Floppy, Dual 16550 Compatible (with 16
bytes FIFO, up to 460K baud rate) Serial Port, ECP (Enhanced Capabilities Port),
EPP (Enhanced Parallel Port) parallel port, Infrared IrDA (HPSIR), and
Amplitude Shift Keyed IR. (ASKIR) port.
Note : 1. i82440ZX only supports up to 256Mbyte SDRAM by using
2 pieces of 168-pin DIMM.
2. i82440ZX just supports to 4 pieces of PCI slots in “master”
mode.
3. This main board don’t have system Hardware monitoring
function.