Lucius M2143, Руководство пользователя

Страница: 7 / 8

6 7
6. CONTROL
(1) Manual Control
(2) External Control
The dimming knob has 5 power levels. 25%, 50%, 75%, 100% and OFF.
Connecting Single LED Fixture
Connect your external LED controller to the driver by connecting the 3.5mm Signal
Cable to the “IN” Port. Then set the dimming knob to the RC setting.
Connecting Multiple LED Fixtures
Continuing on from ‘Connecting Single LED Fixture’ instructions. Connect 3.5mm
Signal Cable to the “OUT” port of the first driver and connect to the “IN” port of
the second driver. Repeat these steps until your desired numbers of fixtures are
connected.
R
C
Input port
Output port
R
C
Controller
Driver 1
Signal Cable
Driver 2 Driver 80
7. WARRANTY - CONTACT YOUR RETAILER FOR WARRANTY
CLAIMS AND SUPPORT.
The company warrants the mechanical and electronic components of this product
and guarantees the materials and workmanship is free of defects if used under
normal operating conditions, for a period of four years from the original date of
purchase.
If you find that there are any defects with this product that relate to either the
workmanship or the materials but are not due to improper use or user error, the
company shall, at its discretion, either replace or repair the product. The date of the
limited warranty shall apply to the replacement from the date of the purchase of the
initial product for four years. For T&C’s please check our website lucius.com.au.