LUCINA AX-09, Быстрое руководство

Страница: 11 / 88

9
D
eu
tsc
h
Fra
nç
ais
Italiano
Español
Por
tug
uês
N
eder
lands
English
If you place your finger on the touch controller and move
it to left and right, the pitch will change.
By pressing the modulation bar you can apply vibrato.
Press a button to select the D Beam effect.
While you perform, position your hand above the
D Beam sensor and move it slowly up and down.
1
1
2
2
☞
For details, refer to p. 11 in the “Owner’s Manual.”
☞
For details, refer to p. 12 in the “Owner’s Manual.”
For the special tones “VIOLIN” and “TROMBONE,” pressing the modulation bar will
vary the dynamics (expression).
D Beam
Explanation
PITCH Modifies the pitch of the sounds you play.
FILTER Modifies the tonal character of the sound you play.
ASSIGNABLE
Allows you to assign a desired effect. With the factory settings, an effect
appropriate for each tone will be applied.
Using the Touch Controller and Modulation Bar Using the D Beam
When you press a button
so it’s lit, the effect listed
in the table below will be
applied.
If you press the lit button
once again, the D Beam
will turn off.