Lucent WaveACCESS LINK BR132, Быстрое руководство по установке

Страница: 72 / 80

2-34 Quick Installation Guide
To connect the WaveACCESS NET SDR132 to your
computer's Ethernet adapter using the 10Base-T
crossover Ethernet cable:
1. Connect one end of the provided crossover Ethernet
cable to the computer.
2. On the back panel of the SDR132, insert the other
end of the cable into the socket marked ETHERNET.
To connect the WaveACCESS NET SDR132 to a
computer through an Ethernet network:
1. Connect the SDR132 to the network using a
standard (10Base-T) Ethernet cable.
2. Configure the SDR132 to accept the computer's
MAC address using either Bootp or the built-in
system monitor, as described in the
WaveACCESS
NET User's Guide.
The SDR132 is now connected and ready to be
powered up.
Connecting the WaveACCESS NET MDR132
The MDR132 can be connected to your Ethernet
network.
To connect the MDR132 to the Ethernet network:
1. Connect one end of a standard Ethernet cable
(10Base-T) to the network or hub.
2. On the back panel of the MDR132, insert the other
end of the cable into the socket marked ETHERNET.
The adapter automatically learns the local network's
environment.
The MDR132 is now connected and ready to be
powered up.