Installing the WaveLAN Card
Installing the Card in your Computer
2-4
WaveLAN/ISA Card User’s Guide
Installing the Card in your
Computer
2
The following directions apply to most PCs. See your PC
owner's manual for more details on how to install an
adapter board.
1
Turn off the power switch of your computer.
2
Turn off the power to all devices attached to your
computer.
3
Disconnect the power cord and all other cables
attached to your computer.
DANGER!
Do not attempt to install the interface card without
disconnecting the power cord and other cables from
your personal computer. If you fail to take this
precaution, you could receive a severe electrical shock
or cause damage to your personal computer and
WaveLAN adapter card.
4
Remove the cover of your personal computer.
Refer to your personal computer owner's manual for
specific instructions about removing the cover.
5
Choose an expansion slot.
Prepare the expansion slot to hold your Network
Interface Card by removing the slot's cover plate.
6
Insert the Interface Card
Align the edges of the card with the expansion slot
and gently press on the top of the card until the edge
connector is seated in the slot (see Figure 2-2 on page
2-5).
isa-src.bk : isa-ch2.frm Page 4 Monday, October 14, 1996 1:23 PM
