Lucent Technologies R4.2, Администрирование

Страница: 562 / 745

A
Summary of Commands logEvent/logMsg
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 523
generates messages within the logging system, but which always uses
SYSMSG as the message format for the messages it generates. The
logEvent
command emulates the logEvent( ) library routine, while the
logMsg command emulates the logMsg( ) library routine.
The logEvent command requires a destination and a priority when it is
called. Messages logged via this interface are explicitly logged to the
specified destinations and at the specific priority.
The logMsg command does not take a destination mask or a priority. It gets
these pieces of information from the logging destination and a priority shared
memory maintained by the logDstPri command via the
/usr/spool/log/msgDst.rules file.
Both logEvent and logMsg require that the proper number of arguments be
supplied for the specified message and that numeric arguments in the
message format match pure numbers from the argument list. For example:
GEN012 OUT_OF_RANGE %D<<value,D>> is out of range \ for
%s<<arg,S>> in %s<<routine,S>>.
This format requires that the first argument be a number, therefore,
logMsg XXX LG_OUT_OF_RANGE -- yes var compute
will fail because “yes” is not a number, while
logMsg XXX LG_OUT_OF RANGE -- 10 var compute
will not fail.