A
Summary of Commands
assign card/channel
UCS 1000 R4.2 Administration 585-313-507
Issue 3 April 2000 375
Description
The annotate
command sends a message to TSM requesting that the given
message be put into TSM’s trace stream. This command is useful for testing
and debugging scripts.
If a channel is specified, the message is associated with the channel’s trace
stream. The message must be fewer than 160 characters.
The annotate
trace message is displayed in the trace output if a trace is
running when the annotate
command is executed. If no trace
command is
running, the annotate trace message is discarded.
Files
/vs/bin/tools
Example
The following example sends a message to TSM to put the message “This is
test 1 for channel 1” in channel one’s trace stream.
annotate 1 “This is a test 1 for channel 1”
assign card/channel
The assign card
command assigns a group number to a card.
The assign channel
command assigns a group number to a channel.
Содержание R4.2
