You cannot install two system phones on the same extension, and the combined
REN (Ringer Equivalence Number) of two devices on one extension cannot
exceed 2.0. (The REN for a system phone is 0.0.)
NOTE:
The Call Assistant Intercom Autodialer is not regarded as a standard device.
This means you can connect a standard device to a system phone that also has
an Intercom Autodialer installed.
PARTNER-model system phones have a built-in auxiliary jack so you can
connect a standard device directly to the phone without using a bridging
adapter—see “Using a Direct Connection” below. If your system phone does
not have a built-in auxiliary jack or if you want to connect two standard devices
together, you must use a Lucent Technologies 267F2 Bridging Adapter—see
“Using a Bridging Adapter” below.
Using a Direct Connection
Figure 2 shows how to connect a standard device directly to a system phone,
using the phone’s built-in auxiliary jack. (Figure 2 is for illustration purposes
only; the placement of the jacks on your phone may differ.)
System Phone
Plug line into
jack labeled LINE
Plug standard device
into jack labeled
AUX
Figure 2. Combination Extension Using Direct Connection
Using a Bridging Adapter
Figure 3 shows how to connect a system phone and a standard device or two
standard devices using a Lucent Technologies 267F2 Bridging Adapter.
Lucent Technolologies
267F2
Adapter
Standard Device Only
System Phone or Standard Device
Wall Jack
Figure 3. Combination Extension Using Bridging Adapter
Installation Guidelines
7
