Lucent Technologies PARTNER Endeavor 362 Скачать руководство пользователя страница 353

Страница: 353 / 407

Troubleshooting

6-22

Problems with Standard Devices

Standard Device Does Not Answer

Possible Cause 1:

Standard phone is not plugged into the Tip Ring ports, which

are the bottom two ports on the processor or 362EC module.

What to do:

Plug the standard phone into the bottom two ports of any module.

■

If the device rings, the problem is solved.

■

If the device still does not work properly, go to Possible Cause 2.

Possible Cause 2:

A standard device (such as a fax machine or answering

machine) does not answer intercom calls or transferred calls because it does not
recognize the distinctive ringing pattern used by the system.

What to do:

Change the extension’s setting for Distinctive Ring (#308) to Not

Active, so the extension uses the same ringing for intercom and transferred calls
as it does for outside calls.

■

If the device works properly, the problem is solved.

■

If the problem remains, call the hotline.

Standard Device Does Not Dial Out Properly

Possible Cause:

A standard device with autodialing (such as a modem) does not

recognize the intercom dial tone generated by the system.

What to do:

Change the setting for

Intercom Dial Tone (#309) for the extension to

Machine, so the system generates outside line dial tone for the extension.

■

If the device works properly, the problem is solved.

■

If the problem remains, call the hotline.

Содержание PARTNER Endeavor 362
























































































































































































































































































































































































































Результаты поиска

Содержание PARTNER Endeavor 362

Отзывы:

Lucent Technologies PARTNER Endeavor 362, Руководство по программированию и эксплуатации, Страница: 353 / 407

Результаты поиска

Содержание PARTNER Endeavor 362

Отзывы: