Lucent Technologies Merlin Magix Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 12

background image

Octel 50 Configuration Note (77007)

Lucent Merlin Magix

C o n f i d e n t i a l

P a g e

10

The above information is provided by Lucent Technologies CAG as a guide.

See disclaimer on page 1

Lucent Technologies

Communications
Applications Group

Location of Mailbox Number for Go to Voice Mail

5

Code for Immediate Subscriber Login to Mailbox

#00#

Start at End of String for Immediate Login

Disabled

Location of Mailbox Number for Immediate Login

5

Start at End of String for Default Code

Enabled

Location of Mailbox Number for Default Code

3

Note -- Code for Go to Voice Mail - The Lucent Merlin Magix will

send either a #02# or a #03# for a code to go to Voice Mail
depending on whether a call is internal or external. We chose
to use one of these codes (the #03#) as the Code to go to Voice
Mail and use the Default code, in system setup, to send calls to
Voice Mail when the other code (#02#) is received.

Note: Verify all these dialing sequences for your switch

7.0

CONSIDERATIONS / ALTERNATIVES

The following items should be considered, below:

q

Transfers

q

Disconnect Types

q

Line/Pool Considerations

q

Intercom Paging

q

Calling Group Log Out

q

Trunk to Trunk Transfers

7.1

TRANSFERS

Internal calls transferred by Octel 50 do not follow a coverage path, they will
forward to the console after the number of rings designated in the Transfer
Release parameter. If this parameter is not set, internal transfers will ring no
answer.

If the Octel 50 is programmed to execute a supervised transfer, Handsfree
Announce must be disabled. If call forwarding is on at the station, ensure that
it is for Ring/No Answer only, and that the ring timer is greater than the
Maximum Rings for the mailbox.

7.2

DISCONNECT TYPES

The Lucent Merlin Magix does not provide consistent disconnect signaling.
Therefore, it may be necessary for the Voice Mail system to disconnect on
silence. Caller prompting and subscriber training are recommended to
encourage both callers and subscribers to exit the system completely when
finished.

Important notes concerning this

integration

«
...
8
9
10
11
12
»

Содержание Merlin Magix













Отзывы:

Нет отзывов

Похожие инструкции для Merlin Magix

Бренд: Samson Страницы: 100

Бренд: Radio Shack Страницы: 3

Бренд: VAT Страницы: 29

Бренд: Balboa Instruments Страницы: 19

Elemec3 013-02-0095-002

Бренд: GAI-Tronics Страницы: 12

Бренд: Vaillant Страницы: 12

Бренд: Bardiani Страницы: 96

Бренд: Eaton Страницы: 4

Бренд: Panasonic Страницы: 8

Бренд: Radionics Страницы: 18

Бренд: Renogy Страницы: 36

Бренд: Harman Страницы: 2

Бренд: Linear Technology Страницы: 6

Бренд: Nortek Страницы: 24

ArmorBlock 1732E-16CFGM12R

Бренд: Allen-Bradley Страницы: 20

Бренд: Integral Страницы: 7

Бренд: select solar Страницы: 2

Бренд: Hunter Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды