Lucent Technologies MERLIN LEGEND Release 7.0, Руководство по системному программированию

Страница: 560 / 1082

MERLIN LEGEND Communications System Release 7.0
System Programming
555-670-111
Issue 1
April 1999
Programming Procedures
3-358 Optional Extension Features
3
Console Display/Instructions Additional Information PC
8. Enter the number of rings before the call goes to Secondary Coverage
(
n
=
1
to
6
).
Dial or type
[n].
Ã
9. Save your entry.
Select
Enter.
10. Return to the System Programming menu.
Select
Exit
twice.
Group Coverage Ring Delay
3
The Group Cover Ring Delay option replaces the Delay Ring Interval programmed
on a systemwide basis in releases prior to Release 4.1.
Use this procedure to specify the following:
■
The number of rings before sending calls to Group Coverage when the
sender does not have Primary or Secondary Coverage or the receivers are
not available, and the Group Coverage receiver is either a Calling Group
only or the QCC queue only (no Group Cover buttons on multiline
telephones).
■
The number of rings, in addition to the Primary Cover Ring delay, before
sending calls to Group Coverage when the sender has Primary or
Secondary Coverage and the receivers are available.
The Group Coverage Ring Delay is programmed for each sender’s extension.
Summary: Group Coverage Ring Delay
3
Programmable by System Manager
Mode All
Idle Condition Not required
Planning Form 4b, Analog Multiline Telephone
4d, MLX Telephone
4e, MFM Adjunct: MLX Telephone
4f, Tip/Ring Equipment
5a, Direct-Line Console (DLC): Analog
5b, Direct-Line Console (DLC): Digital
5c, MFM Adjunct: DLC
Factory Setting 3 rings