Lucent Technologies FT-2000 OC-48, Руководство пользователя и обслуживания

Страница: 1516 / 1578

DLP-550: Detailed Level Procedure 365-575-102
Page 6 of 16 Issue 8.0, July 2002
9. Locate the affected power filter capacitors in the back right corner of the Inter-
connection Panel. Feeder A has one capacitor with a red lead and one with a
black lead. Feeder B has one capacitor with a grey lead and one with a grey
with black stripe lead.
Figure 4 – Example Interconnection Panel
NOTE:
The Interconnection Panels for other shelf types have the same power filter
connectors, but the other connectors may vary.
10. Go to the back of the bay and remove the top or bottom cover, depending on
which shelf is affected. (Remove all screws and lift the cover off.)
11. Locate the capacitors mounted below the PWR label on the left side of the
backplane. The label for each connector indicates whether it belongs to the A
or B feeder.
NOTE:
It is highly unlikely that both the -48 and -48 RTN capacitors are defective.
Therefore it is recommended to replace one at a time (Steps 12-25). If replacing
the first one doesn’t clear the alarm then remove the fuse and repeat Steps
12-25 for the other capacitor.
12. Remove the leads to the affected feeder capacitors.
CIT (DCE)
PWR
-48A RTN
8B/16B
-48A
-48B -48B RTN
DISPLAY
3
3
2
1
2
1
3
3
2
1
2
1
J142A J137A
8A/16A 7B/15B
J140A J135A
P163A P158A
CIT (DTE)
3
3
2
1
2
1
P166A P165A
PAR TLM
3
3
2
1
2
1
3
3
2
1
2
1
3
3
2
1
2
1
3
3
2
1
2
1
J39A J44A J101A J106A J117A
6A/14A
J104A J99A J42A J37A
J85A J93A J95A J92A
J155A
3
3
2
1
2
1
3
3
2
1
2
1
3
3
2
1
2
1
J132A J127A J122A
7A/15A 6B/14B
J130A J120A J115A
P161A P164A P160A J156A
3
3
2
1
2
1
J5A
J3A
3
3
2
1
2
1
3
3
2
1
2
1
3
3
2
1
2
1
3
3
2
1
2
1
3
3
2
1
2
1
J10A J15A J20A J25A
J8A J13A J18A J23A
J34A
J32A
P159A
1B/9B 2B/10B 3A/11A 3B/11B 4A/12A 4B/12B 5A/13A 5B/13B
J125A
1A/9A
OFFICE ALMS TIMING IN PRI TIMING IN SECY TIMING OUT 1 TIMING OUT 2
X.25
LS INTFC
2A/10A
SER TLM 1 SER TLM 2 MISC DSCRT 1 MISC DSCRT 2
USER PNL
OUT
IN
IN
OUT