Lucent Technologies CAJUN M770, Руководство пользователя

Страница: 110 / 266

Chapter 7 Managing Module Hardware
92 Cajun M770 ATM Switch User’s Guide
Setting/Displaying the speed for the serial port
To display the current speed for the serial interface port, use the
hardware serial
speed
command.
To set up the speed for the serial interface port, use the
hardware serial speed
command and type the desired speed after the command as shown:
Setting/Displaying the number of VPI and VCI bits
You can configure the number of VPI and VCI bits that will be used for the VPI and
VCI ranges on all the physical ports for this module. To display and/or change the
VPI/VCI bits for the ATM module, use the
hardware vpivcibits
command.
Use the following command to display the maximum number of VPI and VCI bits
that are used for all ports on the module:.
Use the following command to change the maximum number of VPI and VCI bits
that will be used for all ports on the module. It takes effect only after the next
reboot.
Command:
M15-155s8:/>hardware serial speed
Output:
M15-155s8:/>9600
Command:
M15-155s8:/>hardware serial speed [4800|9600|19200|38400]
Example:
M15-155s8:/>hardware serial speed 9600
Parameters:
[4800 | 38400]
Select the speed at which the serial
interface port will communicate.
Command:
M15-155s8:/>hardware vpivcibits
Output:
Configured number of vpi bits: 3, vci bits: 12
Current number of vpi bits: 3, vci bits: 12
Command:
M15-155s8:/>hardware vpivcibits <vpibits> <vcibits>
Example:
<vpibits>
The maximum number of VPI bits for all
ports on the module
Parameters:
<vcibits>
The maximum number of VCI bits for all
ports on the module