7
Lift fan assembly onto mounting bracket.
Fig.7
Ensure the notch of the ball joint is
positioned on the stopper of mounting
bracket to prevent fan from rotating when in
operation.
LIGHT KIT Installation (Light kit
– optional )
Note: Light kit must be installed by a Licensed Electrician.
NOTE: The light kit is NOT included for selected ceiling fan models and as an optional light kit.
1. Take off the light housing cover from light housing via loosening the light housing screws(Fig.8)
2. Push the decorative cover out from light housing cover.
3. Insert the L and N light wires through the hole of light housing cover. (Fig.9)
4. Tighten the fan light kit to light housing cover firmly. Secure light kit to light housing cover via a
screw nut and washer.
5. Connect the L and N light wires to terminal block inside fan light housing properly.
6. Secure the fan light housing cover back to light housing by 3 screws.
7. Install bulbs with bulb changer, and then turn on the power.
HANGING THE FAN
INSTALLING THE FAN
Fig. 7
Fig. 8
Fig. 9
