Installation Instructions
7 |
P a g e
INSTALLATION DIRECTION (OPTION 2 – Hardwire)
•
NOTE: The appliance is also supplied with accessories for hard-wire option.
In this case, the appliance
MUST BE installed by a licensed electrician. All pole disconnection must be incorporated in the
fixed wiring in accordance with the wiring rules.
I – Installation of the top wall spacer (Figure 3A):
1. Install the round base onto the wall by the appropriate screw and anchor;
2. Attach the top wall spacer onto the body of the appliance by the M5x16 screw;
3. Install the appliance onto the round base then lock it with the M5x6 screw;
II – Installation of the low wall spacer (Figure 3B):
1. Cut the plug off the end of the supply cable;
2. Pull the supply cable through the low wall spacer then connect the supply cable to the appliance via
the quick connector;
3. Attach the low wall spacer onto the body of the appliance and then fix it with the M5x4 screws;
4. Pull the cable through the hole of the nylon fixing;
5. Connect the supply cable to the mains cable via the appropriated termination facility;
WARNING: This is a Class I appliance, earth wire MUST BE connected.
6. Install the nylon fixing onto the wall;
NOTE: The size of the nylon fixing is M16. To engage with the M16 nylon fixing, an appropriate
nut fastener (not included) must be installed onto the plaster wall.
7. Install the appliance onto the nylon fixing then lock it with the M5x6 screw.
