Airfusion Akmani Installation Instructions
6 |
P a g e
INSTALL CANOPY COVER
Loosen the 2 screws from the bottom of the mounting bracket. Fig. 7
Slide the canopy up to the mounting bracket and place the key hole on the canopy over the screw on the
mounting bracket, turn the canopy until it locks in place at the narrow section of the key holes and secure it by
tightening the two set screws. Avoid damaging the electrical wiring prepared previously.
BLADE INSTALLATION
Insert the blade screws through the blade kit and blade then secure the blade to the motor by tightening the 2
screws. Fig.8
Repeat this process to install the other blades to the motor.
Finally install the bottom cover to the light kit housing by rotating it clockwise. Fig. 9
LIGHT KIT INSTALLATION
:
(Optional, light kit not included)
Before installing the light kit to the fan, you need to do the following:
Do not install the bottom cover.
Remove the bottom cover adaptor (2) from the light kit housing (1) by loosening the 3 screws (3). Fig.10
Install the light kit adaptor (4) to light kit housing (1) by using the 3 screws (3). Fig.10
Install the light kit to the light kit adaptor using the light kit user guide instruction.
Fig. 7
Fig. 8
Fig. 9